Independent power supply
Stand-alone systems - systems for any requirement
The SOLARA planning sheet
Photovoltaic island systems (e.g. for holiday homes) are as individual as their users. They must be planned exactly so that they can reliably fulfil their purpose, and have to be adapted to specific needs, the installation site and consumer behaviours.
Such systems include on one side energy sources like generators, solar arrays, wind turbines or a combination of them to generate the needed electricity locally. On the other side inverters and battery chargers are needed to store the energy into the battery and to provide electrical power to the loads.
Use our detailed planning sheet for your system planning. This form helps you gather all the relevant information and provides an easily comprehensible view of your future system and its components and properties. So we can make you an optimal offer
Product Overview
Phoco Pico Lantern Sets - For stationary or mobile use
Multifunctional Pico LED lights can be used on a stationary or mobile basis. They were designed especially for applications where there is no power supply, such as for rural electrification or the leisure / outdoor sector. The Pico lamp is equipped with a highly efficient power LED and excellent charge controlling technology.
Advantages
- Can be charged with solar panel, 12 V battery or grid charging device
- High protection class (IP65)
- USB-powered connection for charging of mobile telephones, MP3 players etc.
- High-power LED
- 3 illumination levels
SOLARA SOLARMODULES for stand-alone systems to 260 Wp
SECURE
- Manufactured under DIN EN ISO 9001:2008, ISO 14001:2009 and OHSAS 18001:2007 compliance
- Salt corrosion resistance tested
- Ammonia resistance tested
- Hail impact tested
- Flame resistant
SOLARA professional and vision series - robust, high-performance and reliable
UP TO 30 YEARS PRODUCT WARRANTY
UP TO 30 YEARS PERFORMANCE WARRANTY
PERFORMANCE OPTIMISED
- Anti-reflective glass for high yield even under diffuse light conditions
- Positive power classification
- 100% PID-safe
- Outstanding NOCT values
FLEXIBLE AND SIMPLE TO INSTALL
- Extended clamping area
- Up to 5400 Pa load
- At transverse position 3500 Pa load
WE GUARANTEE
- High yields due to anti-reflecting glass
- Best low-light performance
- Up to 30 years Product- and Performance warranty
- Manufactures in German
INVERTERS FOR AC-CONNECTED SYSTEMS
These components are the basement for the set-up of stand-alone systems in different power classes.
Doesn’t if it is summer cottage, a remote farm or a village - nearly everything is possible. Just by adjusting the programming of the inverter, also back-up systems can be installed to energy
supply when the public grid fails.
Battery inverter Sunny Island
The Features:
- Parallel and three-phase connection with up to 36 units possible
- Independently programmable contacts
- Back-up systems possible
- Battery charger for several battery types
- Remote access via LAN or GSM
- IP54 protection class
At SOLARA there are also the right accessories:
Power supply and Back-up systems
The Swiss company Studer Innotec is one of the world’s leading manufacturers of sine-wave inverters and battery chargers for use in photovoltaic, marine and mobile applications, in emergency
power supply and in telecommunications.
The combination inverters in the Xtender series, which can be remote controlled, are extraordinarily versatile. They combine the features of an inverter, battery charger, switching mechanism and
support for external AC power sources, all in one device. All of these functions can be combined with one another and controlled fully automatically, which provides ease of use and extremely
efficient utilisation of available energy.
The features
- Parallel and three-phase connection with up to nine Xtenders
- High performance and exceptional overload capacity
- Support of AC power source with Smart-Boost
- Suitable for backup systems
- Fast switching time (up to 15ms. max.)
- Battery charger with programmable charging strategies and charging voltages
- Remote access via LAN, GMS and SMS possible
- Independently programmable auxiliary contacts
- Real-time clock for storing events and for programming the auxiliary contacts
Alternating current (AC) as from the socket
The AJ series of sine-wave inverters convert direct current from one battery into alternating current that can be used for all electronic devices. They function as reliably and trouble-free as a Swiss clock, and hold up even under extraordinary loads.
Further information in the brochure SOLARA SOLARENEGY FOR STAND-ALONE SYSTEMS.
The features
- Highly efficient
- Microprocessor control
- Complete inverter protection against overload, overheating, short-circuits and reverse polarity
- Adjustable load detection
- Function for optimising battery life
Charge Controllers & Remote Meter
MorningStar MPPT Solar Controllers - High Performance, maximum flexibility
Extra yields of 10-15% per day by MPPT technology. Best results in systems with higher number of cells in the solar module.
The features
- Max. PV open circuit voltage 150V and 600V
- 12/24/48V systems possible
- Build-in or remote meter
- Ethernet connection
- several communication ports
- MODBUS protocol
- 200 days data logger
- Programmable via MS-View software
- full electronic protection
- Solid design and no fans
Studer MPPT Solar Controller - High performance, versatile adaptable
High efficiency and a wide range of applications - even for large solar systems. Ideal for use in combination with Studer Xtender inverters, because the same communication bus is used.
The features
- 112/24/48V systems possible
- max. PV open circuit voltage up to 900V
- full electronic protection
- remote access via LAN or GSM
- Up to 15 units in parallel
- IP54 protection (not VS120)
- Two isolated MPPT inputs for up to 600V (only VS-70 & VS-120)
- Meter, programming and data logging via RCC02/03 accessory
MorningStar PWM Solar controllers - The professional way of charging
Top quality made by MorningStar with 5 years warranty. With its large portfolio and the wide power range making MorningStar the first choice.
SOLARA solar controls by Phocos - The optimal way of charging
SOLARA charge controllers are charging various battery types always with a controlled charging characteristic.
We guarantee high reliability, latest technologies and easy handling at competitive pricing. The LVD terminal can help to protect the battery from deep discharging.
Solara Remote Meter - The control station for your solar system
Good to know, the display shows battery voltage, charging current, load current.
Further information in the brochure SOLARA SOLARENERGY
FOR STAND-ALONE SYSTEMS.
Batteries your power storage
Hoppecke OPzV Batteries - Stationary batteries with Gel Technology
These stationary lead acid batteries are permanently sealed and need not be filled with water. Because they contain a fixed electrolyte gel, they can also be installed horizontally if needed. They have an especially long cyclical lifespan thanks to positive tubular plates.
Hoppecke OPzS Batteries - Stationary batteries with Liquid Electrolyte
These vented lead acid batteries for cyclical applications are equipped with positive tubular plates that ensure especially long life, even under high charging and discharging loads. They are therefore ideally suited for solar and off-grid applications. They contain liquid electrolytes and are equipped to attain maximum energy efficiency.
Rolls Batteries - Cells and blocs with liquid electrolyte
The liquid-acid batteries of Rolls being used as reliable energy storage for PV-systems. The large range of available capacities and the robust flat-plate design are remarkable for these batteries.
Hoppecke AGM Batteries - Bloc batteries 12 V / 6 V blocks
Sealed lead-acid battery, almost maintenance-free due to Absorbent Glass Mat-technology. The ideal battery for small and mid-sized cyclic applications.
Further information in the brochure SOLARA SOLARENERGY
FOR STAND-ALONE SYSTEMS.
Mounting systems
Innovative, efficient, durable - Mounting systems for any kind of installation
A vast number of installation possibilities in addition to high mechanic stability give our mounting systems a broad area of application. Our mounting systems are characterized by innovation and performance as well as simple and low-cost installation. We provide complete systems and will compile mounting systems for on-roof systems, roof-parallel, elevated or building-integrated systems to suit your needs.
Metasole
- Easy to install solution for piched roofs with trapeziodal cover.
- Only four different components are need.
- EPDM-sealing grant water tightness
Ecoline
- A price optimized single layer mounting solution
- Flexible components for portrait or landscape installation
- Only stainless steel and aluminum components being used
Ground mounted system
- Open land system, individually engineered with static calculation
- One row of stands can carry several panel rows
- Exclusively made from corrosion-resistant stainless steel and aluminum components
Take for your system request our detailed planning sheet. It is designed to retrieve all relevant information to shows the future system, its components and properties. So we can create an optimal offer.
Contact us. We are happy to help!
Further information in the brochure SOLARA SOLARENEGY FOR STAND-ALONE SYSTEMS.
More information in our catalogue!
